Tysim Piling Equipment Co., Ltd
简体中文
English
400-019-0510
maofl@tysim.com
APIE
Home
About
Company Profile
Company Culture
Development Path
Development Potential
Manager Speech
Honor
News
Products
Products List
Download Center
Cases
Videos
Corporate promotional video
Equipment operation video
Used Equipment
Contact
NEWS CENTER
TYSIM PILING EQUIPMENT CO., LTD
KR50 Nanjing Levee Reinforcement Project
The total length of this project is about 4.2km. The clay impervious wall is punched and grasped by bushing holes. The hole spacing is 0.92m and the wall depth is 9.5m.
05
2021
/
08
KR80K small rotary drilling rig for river treatment in Xishan, Zhejiang
This project is constructed in a river course. The selection of construction machinery is relatively high. The bottom of the river is silt and water. The weight of the machine should not be too heavy and the volume should be small. In a section of the river, it must be equipped with excavators and pumps. Pull out the machine for efficient work and complete the work in a short time.
KR150 Rotary Drilling Rig Zhejiang Tiantai Photovoltaic Power Project
The main body of this project is located in the Meng'an Reservoir in Yizhai Pian, Baihe Town, with a total investment of 190 million yuan and an area of about 569 mu.
KR125 Rotary Drilling Rig Foshan Community Apartment Building Project
This project is located in Nanhai District, Foshan City, with a construction area of 16,729.24 square meters, 14 floors and 1 underground floor, and a basement area of 3568.8 square meters. The borehole diameter of the project is 800mm-1000mm, and the borehole depth is 25m. The construction stratum is silt and clay. The construction plan uses mud to protect the wall.
KM150 Telescopic Arm Grab Abu Dhabi
This project is located in Abu Dhabi, the Middle East. The construction depth is 13 meters. The telescopic arm module customized by Taixin Machinery is used on the VOLVO 290 machine. This excavator has been working for more than 5000 hours, and all aspects of functions and parameters are normal. Its efficient construction ability and flexible control are deeply loved by customers. It is highly praised for the professionalism and responsible attitude of our engineers.
KR90M long auger drilling rig Australia construction
This project is located in Sydney, Australia. The KR90M is very suitable for the local construction stratum. The construction stratum on the site is mainly sand and gravel. The hole depth is 15m and the hole forming time is about 20 minutes. KR90M is very satisfied with its good handling performance, strong construction power and efficient construction.
Construction of Hanzhong Underground Comprehensive Pipe Gallery by Taixin Machinery KR80A Small Rotary Drilling Rig
The KR80 small rotary drilling rig of TYSIM Machinery in this project is responsible for supporting piles. The hole diameter is 800mm, and the depth is 10-16m.
Red sandstone construction of KR60A high protection tube in Shangrao, Jiangxi
TYSIM Machinery KR60A small rotary drilling rig is mainly engaged in urban housing construction in Shangrao, Jiangxi. This construction has a hole diameter of 800mm and a depth of 13m.