Company News-TYSIM

Tysim Piling Equipment Co., Ltd

简体中文

English

400-019-0510

maofl@tysim.com

APIE

NEWS CENTER

TYSIM PILING EQUIPMENT CO., LTD

Home

KR125 Xuzhou Institute of Engineering Project

In May 2013, KR125 moved to Xuzhou Institute of Technology to participate in the foundation construction of the teacher's dormitory building. The pile depth ranges from 24-27 meters, and the pile diameter is 600-800. The stratum is mainly clay, but the clay contains a large amount of sand, and there are two layers of quicksand of about 2 meters. The speed of the single bucket needs to be controlled during the drilling process. , The speed of the power head, and the lifting speed of the main winch. Reduce the disturbance to the hole wall and ensure the quality of the pile. an lang=EN-US>The stratum above 10 meters is red clay with relatively high viscosity, and the hardness of strongly weathered mudstone below 10 meters is 5-10Mpa. Because the stratum is all clay structure, the dry hole construction method is adopted. The drilling footage is 400-500mm, and the footage is about 300mm after the groundwater layer is drilled. The average time for each hole to be formed is 1 hour and 30 minutes.

2021

KR125 Kaili Folk Culture Village, Guizhou

It is said that the small machine cannot do the construction site of the rock, but the KR125 used the facts time and time again to forcefully counteract this statement. After the Chongqing drilling rig entered the rock construction, another KR125 drilling rig of ours entered Kaili City, Guizhou Province to participate. The construction of a folk culture village in Kaili.

2021

KR125 special multi-engineering project

The "Trinidad and Tobago aid project" under the responsibility of Shanghai Construction Engineering Group Overseas Department is divided into three major engineering parts: the cycling track, the National Swimming Training Center and the Kuwa National Children's Hospital. Among them, the pile foundation project has a total of more than 4,000 cast-in-place piles, with a total project cost of 10 million yuan.

2021

Full hydraulic pile cutter is used in China

In January 2012, Jiangsu Taixin Machinery Technology Co., Ltd. produced the KP315 full hydraulic pile cutter. This is a new concept of pile breaking equipment. It adopts a modular design and is powered by pressure oil. A single drill rod can provide The pressure is 280KN. Mainly for all round cast-in-place piles and pipe piles with a diameter in the range of 300mm-1800mm, the number of modules can be flexibly adjusted for construction according to different pile diameters, and it has been a national invention.

2021

KP315 Pile Cutter Shows Its Skills In The U.S.

After Jiangsu Taixin Machinery Technology Co., Ltd. exported pile breaker KP315A to Hawaii in the United States in July 2013 for the first time, a number of pile cutters have been sent to the U.S. market in succession. The state's construction market has shown its talents.

2021

KP315 pile cutter construction in Brazil

Many visitors watched this exhibition, and from the grand occasion, it was seen that Brazil is a large construction investment market, accounting for nearly half of the South American market, and has a strong ability to radiate neighboring countries. It is also reported that more than 50 Chinese companies participated in the exhibition. XCMG has a strong lineup at this exhibition and is proud of being made in China.

2021

KR80A Russia construction case

Project Overview: Use our company's KR80A to drive piles with a diameter of 800mm and a depth of about 12m in the company's stockyard. The first 6m of the stratum is a fine sand layer, and then a sandy soil layer. The total number of piles is 185. The customer was very satisfied with the high efficiency and low failure rate of the drilling rig. The construction period was completed ahead of schedule. The construction effect of the KR80A rotary drilling rig was also highly recognized by the customer.

2021

KR50 rotary drilling rig Fujian construction

KR50 rotary drilling rig user introduction Boss: 27 years old, junior high school education, strong self-learning ability, and rich experience in using excavators. Pilot: 23 years old, second-year education level. Assistant: Junior high school education, 29 years old, almost no machine maintenance experience. Routine maintenance is carried out by the operator...

2021

< 1...35 36 37...45 >

TYSIM PILING EQUIPMENT
is a professional piling enterprise
focusing on the R&D and manufacturing of small and medium piling machinery

Office: TYSIM PILING EQUIPMENT
Add: No. 345, Yanxin Road, Huishan Economic Development Zone, Wuxi
Tel: +86 400-019-0510
Hot Line: +86-18352067788
E-mail: maofl@tysim.com

COOKIES

Our website uses cookies and similar technologies to personalize the advertising shown to you and to help you get the best experience on our website. For more information, see our Privacy & Cookie Policy

COOKIES

required

These cookies are necessary for basic functions such as payment. Standard cookies cannot be turned off and do not store any of your information.

analyze

These cookies collect information, such as how many people are using our site or which pages are popular, to help us improve the customer experience. Turning these cookies off will mean we can't collect information to improve your experience.

Feature

These cookies enable the website to provide enhanced functionality and personalization. They may be set by us or by third-party providers whose services we have added to our pages. If you do not allow these cookies, some or all of these services may not function properly.

advertise

These cookies help us understand what you are interested in so that we can show you relevant advertising on other websites. Turning these cookies off will mean we are unable to show you any personalized advertising.